Product Overview
The Re-Verber-Ray THGH10-3 is a Gripple hanging cable bracing kit specified for longitudinal (forward and backward) sway bracing at each reflector hanging bracket on Re-Verber-Ray DSR series patio heaters. In the heater, the bracing cable restrains reflector movement caused by wind or high air movement in outdoor and semi-outdoor installations. Each series manual calls for it (or a field-supplied equivalent) at every reflector hanging bracket, and specifies a minimum working-load rating on the suspension material to keep the assembly secure under load.
It is specified across the Re-Verber-Ray DSR family, including the DSRF, DSRL, DSRS, and DST series; see Fitment below for the full model list.
It ships as a complete assembly: a looped cable paired with a locking fastener, ready for field installation at the bracket.
When replacing this cable, shut off gas and disconnect power to the heater before working at the reflector brackets, and verify the bracing point and cable routing against the unit's installation instructions. Have a qualified technician confirm the reflector is secure and operating properly before returning the heater to service.
Cross-Reference & Fitment
| Fits | DSR series patio heaters, DSRF, DSRL, DSRS, DST |
