Product Overview
The CKP-53-4 is a factory propane conversion kit from Re-Verber-Ray, built for the FA-100N gas-fired unit heater. Installed in the gas train ahead of the burner, the kit resizes the gas orifice and resets the regulator so the FA-100N burns propane at the correct input rate and manifold pressure instead of natural gas, and it is rated for installation at 2000 ft elevation and below.
Fits the Re-Verber-Ray FA-100N gas-fired unit heater; see Fitment below for the full model list.
The kit ships with the orifice, regulator, and hardware needed to convert the unit from natural gas to LP/propane fuel.
This kit is for the original fuel conversion, not a like-for-like part swap. Shut off the gas supply and disconnect power before working on the gas train, verify every setting against the unit's installation manual, and have a qualified gas technician confirm proper burner operation before returning the heater to service. Reference the Re-Verber-Ray FA Series Installation, Operation, Maintenance, and Parts manual for the full conversion procedure: https://www.reverberray.com/wp-content/uploads/2016/05/liofa_00413.pdf
Specifications
| Voltage | N/A |
| Gas Type | Propane |
| Elevation Rating | 2000 ft and below |
Cross-Reference & Fitment
| Fits | FA-100N, FA-100-SS, FA-100, FA |
