Product Overview
The DSRF Series is a decorative, two stage, low intensity tube heater from Re-Verber-Ray, built for outdoor and semi-outdoor spaces where exhaust venting is required. It is a complete gas fired heater assembly with a sleek modern housing designed to look good against any decor while covering large open areas.
Output across the lineup runs from 65 MBH high fire / 50 MBH low fire up to 100 MBH high fire / 65 MBH low fire. Every model in the series is dual certified to ANSI Z83.20 and ANSI Z83.26, and runs pre- and post-purge controls with self-diagnostic LED, microprocessor based circuitry for two stage operation. Each DSRF model is rated to cover up to a 12' x 26' area, making the series a fit for driving ranges, patios, outdoor dining, and other large open-air spaces where consistent radiant heat and a finished appearance both matter.
The series is available in two overall lengths: a 16'4" run (DSRF-30 models) and a 21'10" run (DSRF-35 models), covering the 65 to 100 MBH output range noted above.
Because the DSRF Series is vented, installation requires a proper vent connection and clearance planning per the manufacturer's installation manual. This is a gas fired appliance and must be installed and serviced by a qualified technician in accordance with local code.
Backed by Re-Verber-Ray's standard warranty and full documentation, including the DSRF Series brochure, submittal package, and installation, operation, parts, and maintenance manual. Call Indiana Radiant for help sizing the right model and vent configuration for the space.
Specifications
| Input BTU (high/low fire) | 65-100 MBH high fire / 50-65 MBH low fire, varies by model: DSRF-30-65 65/50, DSRF-30-80 80/52, DSRF-35-65 65/50, DSRF-35-80 80/52, DSRF-35-100 100/65 |
| Fuel type | Gas-fired, two stage; available in natural gas or propane (LP kit) |
| Overall length | 16'4" (195.5") on DSRF-30 models; 21'10" (261.75") on DSRF-35 models |
| Width | 18.25" (all models) |
| Height | 11.75" (all models) |
| Venting | Vented, requires a vent connection; dual certified to ANSI Z83.20 and ANSI Z83.26, positive-pressure two stage design |
| Coverage area | Up to 12' x 26' per heater (all models) |
Documents
- dsrf-series-patio-heater-install.pdf (install)
